HexArmor 7090 Heavy Duty Work Gloves Liquid Chemical Cut & Puncture Resistant
HexArmor 7090 Heavy Duty Work Gloves Liquid, Chemical, Cut & Puncture Resistant
Family: Heavy Duty Gloves
Some job sites require more protection – they demand the strongest, toughest, and most resilient safety gloves.
HexArmor® has spent many years on sites like this – it’s how we created the heavy-duty line of products. Built to handle the most extreme occupational hazards, HexArmor® heavyduty gloves are built from the inside out, with proprietary SuperFabric® brand materials, giving each glove Level 5 cut resistance and industrial puncture resistance. We put everything we have into building our heavy-duty line of safety gloves, and the result is purpose-built PPE you can trust.
- Canvas safety cuff and particle nitrile coating for liquid and chemical resistance
- Made with SuperFabric® brand material for the highest cut-resistance available on the market, exceeds ISEA/CE level 5 (over entire hand)
- Industrial puncture protection over entire hand from wires, metal, wood, and glass
- Updated construction with increased dexterity, better fit and feel
- Particle nitrile coating for liquid resistance
- Style: Heavy Duty
- Grip: Wet or dry
- Cut Resistance: 5000+ grams in noted enhanced areas
SuperFabric® Cut - Exceeding Industry Standards for Cut-Resistance
HexArmor® products, made with SuperFabric® brand materials, offer industry leading cut-resistance, exceeding both ISEA/ANSI and CE/EN388 Level 5 cut-resistance. Performance is enhanced through the configuration of tiny guard plates, which provide resistance to lacerations and slashes like no other material on the market.
Exceeds ISEA/ANSI (ASTM F1790-05) and CE (EN388) Level 5
Shielding effect keeps sharp cut hazards (metal, blades, glass) from slipping between fibers and causing cut injuries
Won't snag or abrade like typical fiber-based, cut-resistant gloves
Typical cut-resistant gloves are made with a performance fiber (Kevlar®, Dyneema®, Spectra®) or blend of cut-resistant performance fiber. While these gloves offer some levels of cut-resistance, they lack the ability to prevent hazards from puncturing or penetrating the skin surface. When a jagged piece of metal, wire, glass, or splinter comes up against a cut-resistant glove fiber, it will find a "window" between the fiber rows and cause a laceration.
At HexArmor®, our cut-resistant gloves offer more than just protection from straight edge cut hazards. We realize there are variables (force, angle, application) that come into play and can affect how a cut hazard will contact the user. SuperFabric® brand material is an ideal solution for cut-resistant gloves, as it protects from both straight edged cuts and variable situations.
Industrial Puncture Protection from a Variety of Hazards
HexArmor® gloves, arm, and body protection, made with SuperFabric® brand materials, are engineered to deflect and block industrial puncture hazards by limiting the space between the guard plates. Our puncture-resistance is unique because it stops a variety of industrial puncture hazards, while other technologies only perform well in test environments.
Guard plate configurations allow industry leading puncture protection from nails, slivers, and wires
Spacing between guard plates provides needed flexibility without sacrificing performance
Punctures are deflected, blocked by SuperFabric® brand material guard plates
Due to inherent construction, conventional materials such as cotton, leather, aramids, and nylon are unable to stop sharp objects from penetrating through the material. You may see products with a high CE puncture rating, which tests with a blunt force probe. We do not recommend using this method for industrial puncture-resistance, as industrial punctures usually have cutting edges and tips, not blunt tips.
**NOTE... If you have measured your hand correctly as shown above you should have no issues with sizing.
The gloves however will be quite firm to put on especially when new.
Work your hands into the gloves & fingers fully into the tips remembering they will give a little.
Wearing these gloves offer you a vastly improved chance of minimising or avoiding injury in many situations where otherwise a serious injury/laceration may have have resulted. However the gloves do not make you immune or impervious to sustaining an injury with the unpredictable nature of hazards on a job site.
Personal protective equipment is not a substitute for effective engineering, administrative controls, safe work practices, or other control measures.
Q. Should cut-resistant gloves be used to protect one from cuts from powered/mechanical equipment like powered saws and drills?
A. Most all manufacturers of cut-resistant gloves will not suggest the use of cut-resistant gloves for protection against powered devices. Gloves are typically tested for use with non-powered blades and sharps only.
The use of a glove with powered equipment could potentially harm an individual. If the moving blade catches the glove, it could result in a person getting pulled into moving machinery. Moving machine parts have the potential for causing severe workplace injuries